dukhoon item good & usefull thank you very much dear client
Pleasantly surprised at how well this portable incense burner works, AFTER I figured out how to operate it. Instructions were not in English. Below I share my unofficial figuring on *how to'* operate for non-Arabic readers like myself. :)
Heats fast and releases the incense scents quickly. Generates enough heat to release the multi-level scents of the higher quality incense. Great for a car, room, or to even freshen hair quickly if around unpleasant smells. Works with oudh! Does not work with wax or oils!
How to use:
1. Must use fine, small sized pieces or crumble your bakhoor/muttar chips. Too much in chamber and the lid will not go back on and stay on. If you have this problem go back and either remove some product or break it up more. The biggest learning curve was figuring out how fine the incense needed to be and amount to place in chamber. If in doubt make chips finer.
2. Turn on power switch located on bottom of handle.
3. Move to unlock trigger mechanism with switch under the trigger.
4. Squeeze trigger once for about a second and release.
5. Wait!
6. A fan will start to run after it heats up for a bit and smoke will slowly appear, increasing as the incense heats.
7. Has an auto shut off, or you can turn off by pressing trigger again or flipping power switch off.
That's it. Simple.
Main thing is I wish the cap would lock on better especially since being a portable burner it will be jostled about when not in use. Have not had it long, only a couple weeks and have used it maybe a dozen times so will update when it's longevity is better tested.
Heats fast and releases the incense scents quickly. Generates enough heat to release the multi-level scents of the higher quality incense. Great for a car, room, or to even freshen hair quickly if around unpleasant smells. Works with oudh! Does not work with wax or oils!
How to use:
1. Must use fine, small sized pieces or crumble your bakhoor/muttar chips. Too much in chamber and the lid will not go back on and stay on. If you have this problem go back and either remove some product or break it up more. The biggest learning curve was figuring out how fine the incense needed to be and amount to place in chamber. If in doubt make chips finer.
2. Turn on power switch located on bottom of handle.
3. Move to unlock trigger mechanism with switch under the trigger.
4. Squeeze trigger once for about a second and release.
5. Wait!
6. A fan will start to run after it heats up for a bit and smoke will slowly appear, increasing as the incense heats.
7. Has an auto shut off, or you can turn off by pressing trigger again or flipping power switch off.
That's it. Simple.
Main thing is I wish the cap would lock on better especially since being a portable burner it will be jostled about when not in use. Have not had it long, only a couple weeks and have used it maybe a dozen times so will update when it's longevity is better tested.
Comments
Post a Comment